The temperature sensor allows to trigger combined actions or to send alarm messages. State values can be transmitted by various protocols (syslog, SNMP traps, emails). This way, a control of the environmental conditions is possible at any time.
The xBus interface can be cascaded to any point on the network using a standard network cable. Connecting other xBus peripheries is possible over the two RJ45 ports on the front.
Temperature: -25°C to +60°C
Accuracy: +/- 0.5 ° C (typ) to +25 ° C | +/- 1°C (maximum) from -10°C to +60°C.
No external power supply
Up to 4 sensors can be connected directly in series with an ePowerSwitch Master or a VidioGuard. More sensors can be attached through the xBus Extender.
The installation and setup of the xBus module is very simple and requires no additional calibration. Using a mounting bracket, the installation at almost any location is possible.
A user-defined name (up to 32 characters) can be assigned to each xBus module using an ePowerSwitch or a VizioGuard. Each sensor is uniquely identifiable this way.
The analog measured values can be displayed in a diagram and the time interval between two measurements is set flexible.
The sensor with its digital xBus interface is designed for easy and fast installation in a 19″ rack. The mounting angle is rotatable by 90 degrees to ensure flexibility in mounting the device.
- Environmental Monitoring1.02 MB
Smart temperature sensor with double xBus interface for all ePowerSwitch Master and VizioGuard monitoring systems.
- Digital transmission
- No calibration needed
- No power supply needed
- Cascadable, dual xBus interface
- RJ45 cabling up to 200 m.
- Incl. 19" mounting plate
- Protection: IP30
- Temperature :
- -25°C to +60°C
- +/- 0,5°C (typique) to +25°C
- +/- 1°C (max) de -10°C to +60°C