The combination of temperature sensor and 2 digital dry inputs allows to trigger combined actions or to send alarm messages. State values can be transmitted by various protocols (syslog, SNMP traps, emails). This way a control of the environmental conditions is possible at any time.
The xBus interface can be cascaded to any point on the network using a standard network cable. Connecting other xBus peripheries is possible over the two RJ45 ports on the front.
Temperature: -25°C to +60°C
Accuracy: +/- 0.5 ° C (typ) to +25 ° C | +/- 1°C (maximum) from -10°C to +60°C.
The module has a removable screw terminal and the cable ends are alternatively clamped.
No external power supply
Up to 4 sensors can be connected directly in series with an ePowerSwitch Master or a VidioGuard . More sensors can be attached through the xBus Extender.
The installation and setup of the xBus module is very simple and requires no additional calibration. Using a mounting bracket, the installation at almost any location is possible.
A user-defined name (up to 32 characters) can be assigned to each xBus module using an ePowerSwitch or a VizioGuard. Each sensor is uniquely identifiable this way.
The analog measured values can be displayed in a diagram and the time interval between two measurements is set flexible.
The sensor with its digital xBus interface is designed for easy and fast installation in a 19″ rack. The mounting angle is rotatable by 90 degrees to ensure flexibility in mounting the device.
- Environmental Monitoring1.02 MB
Temperature sensor with 2 digital inputs
This xBus interface has 2 separate digital dry inputs and a built-in temperature sensor. To one of the two inputs a glass breakage sensor (or vibration sensor) may be attached. The device offers the connection to any ePowerSwitch Master or VizioGuard.
- 2 digital contacts
- Cascadable up to 200 meter
- Digital transmission
- Dry contact input
- Incl. mounting plate for 19"
- No external power supply
- Standard RJ45 cable