Push Button

Description

Environmental Monitoring
The push button with microprocessor and xBus interface allows triggering of pre-programmed actions by a short or long press of the button. It can be connected at any position within the xBus row to trigger actions (such as the control of electrical outlets or sending alarms via SNMP traps, syslog or emails).

Cascadable
The xBus interface can be cascaded to any point on the network using a standard network cable. Connecting other xBus peripheries is possible over the two RJ45 ports on the front.

No external power supply
Up to 4 sensors can be connected directly in series with a ePowerSwitch Master or a VidioGuard . More sensors can be attached through the xBus Extender.

Easy installation
The installation and setup of the xBus module is very simple and requires no additional calibration. Using a mounting bracket the installation at almost any location is possible.

Assigning names
A user-defined name (up to 32 characters) can be assigned to each xBus module using a ePowerSwitch or the VizioGuard. Each sensor is uniquely identifiable this way.

Graph
The analog measured values ​​can be displayed in a diagram and the time interval between two measurements is set flexible.

Mounting
The sensor with its digital xBus interface is designed for easy and fast installation in a 19″ rack. The mounting angle is rotatable by 90 degrees to ensure flexibility in mounting the device.

Product inquiry

Push Button

The xBus interface push button can be connected to any ePowerSwitch Master or VizioGuard. The operation is done manually by short or long pressing the button to trigger a pre-programmed action.

  • Cascadable up to 200 meter
  • Digital transmission
  • Incl. mounting plate for 19"
  • No external power supply
  • Pushbutton with double function
  • Standard RJ45 cable